Weighted coursework
Homework 90% at 30%, a midterm 80% at 30%, and a project 95% at 20% contribute 70 percentage points across 80% completed weight. The current grade is 87.5%.
Calculate a numeric course grade from weighted work or earned points, then estimate what you need on one remaining final assessment without assuming a letter-grade scale.
Use Weighted Grades when assignments or categories count for different percentages of the course. Use Points-Based Grades when the course grade is based on total points earned divided by total points available.
CalcRocket reports a numeric percentage because letter-grade thresholds, passing scores, and grading policies vary between schools, courses, and countries.
The calculation normalizes completed work. A 90% average over work worth 50% means a 90% current grade and 45 percentage points contributed to the full course.
Current grade = Σ(score × weight) ÷ Σ(weight)Scores above the available points are allowed because some courses award extra credit.
Grade = total points earned ÷ total points possible × 100The calculator treats all remaining course weight as one final assessment.
Required final = (target grade − earned course contribution) ÷ final weight × 100Divide the required points by the final points possible to obtain the required percentage.
Required points = target × (current possible + final possible) − current earnedHomework 90% at 30%, a midterm 80% at 30%, and a project 95% at 20% contribute 70 percentage points across 80% completed weight. The current grade is 87.5%.
Scores of 18/20, 45/50, and 82/100 total 145/170, or approximately 85.29%.
With 70 percentage points already earned, 20% remaining, and an 85% target, the required final score is 75%.
Use weights only when your syllabus assigns percentages. Otherwise, use points earned and points possible.
The weighted final solver assumes the entire remaining percentage belongs to one final assessment.
The calculator permits scores above 100%, but your course may apply different extra-credit rules.
A current grade describes performance on completed work. Course contribution describes how many percentage points that work has earned toward the full course grade. These values differ whenever completed weights total less than 100%.
Weighted grading assigns explicit importance to assessments or categories. Points grading gives each point equal value across assignments. Do not average assignment percentages unless their weights or points possible are equal.
This calculator does not convert the result to A, B, C, D, F, pass/fail, or GPA. Consult the grading policy supplied by your instructor or institution.
Choose the method used by your course, enter completed assessments, and calculate. Weighted mode normalizes scores across completed weights; points mode divides total earned by total possible.
Each score contributes according to its course weight. The current completed-work grade divides earned contribution by completed weight.
Add all points earned, divide by all points possible, and multiply by 100.
Enter completed grades, enable the final-score section, and provide a target. Weighted mode uses the remaining course weight automatically.
A total below 100% represents unfinished work. A total above 100% is rejected.
Yes. Some courses award extra credit, so this calculator allows scores and earned points above 100%.
Current grade measures performance only on completed work; contribution measures its effect on the full course grade.
No. GPA systems vary and are outside this calculator's scope.
No. Results are numeric percentages and make no letter-grade assumptions.
The exact requirement is shown with a note that it may be unattainable unless extra credit is available.
The actionable required score is shown as 0%, with an explanation that the target is already secured under the entered assumptions.